Airless Sprayers, Rollers & Squeegees

Roof coatings only perform if they go on at the right thickness and cure over a clean, dry substrate. Silicone, acrylic, and elastomeric systems are applied here with airless sprayers, rollers, and squeegees chosen for the coating, the deck condition, and the mil thickness the manufacturer's warranty requires.

Getting the Roof Ready

Pressure Washers & Soft-Wash Systems — Low-pressure washing removes moss, algae, and chalking residue so the coating bonds to a clean surface instead of sitting on top of build-up.
Moisture Meters — Readings through the deck confirm the substrate is dry enough to coat before any material goes down.

Applying the Coating

Airless Sprayers — Even, consistent coverage across large flat and low-slope sections.
Rollers & Squeegees — Detail work at edges, penetrations, and seams, and the tools used to check and correct thickness by hand where a sprayer alone can't confirm it.
Photo Documentation Apps (CompanyCam) — Time-stamped photos of each coat, shared with you as the work proceeds.